مدیریت انعطاف‌پذیری در زنجیره تأمین
الموضوعات :
عبدالله آراسته
1
,
ابوالفضل خطی دیزآبادی
2
,
محمد مهدی پایدار
3
1 - دانشجوی کارشناسی ارشد، گروه مهندسی صنایع، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
2 - استادیار، گروه مهندسی صنایع دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
3 - دانشیار گروه مهندسی صنایع دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
الکلمات المفتاحية: زنجیره تأمین, انعطاف‌پذیری, منبع دوگانه, تحلیل تصمیم, اختیارات طبیعی,
ملخص المقالة :
هدف از این مطالعه ارائه مدلی برای شناسایی و تحلیل انعطاف‌پذیری موجود بین اجزای مختلف زنجیره تأمین است. انعطاف‌پذیری زنجیره تأمین معرفی شده و اهمیت آن مورد بررسی قرار می‌گیرد. این با بررسی ادبیات انعطاف‌پذیری دنبال می‌شود. در مرحله بعد ، روش‌هایی برای ارزیابی انعطاف‌پذیری مورد بررسی قرار می‌گیرند: تجزیه‌وتحلیل تصمیم، درخت تصمیم و اختیارات طبیعی. در این مقاله ، چگونگی تنظیم بنگاه‌ها در برابر تأثیر عدم‌قطعیت در زنجیره تأمین و مراکز مورد بررسی قرار گرفته است که چگونه آن‌ها می‌توانند از اختیارات طبیعی برای مواجهه با آن و اتخاذ رویه‌های منابع دوگانه استفاده کنند. به‌عنوان یک ارائه، یک ساختار مشترک را برای کمک به مدیران در مورد وقفه‌های پیش‌آمده پیرامون نظم بنگاه و انتخاب سیستم‌های تنظیم‌شده مشخص می‌کند. در وهله اول، این یک بررسی کلی از پاسخ‌های قابل تصور برای نظارت بر وقفه‌های احتمالی را ترتیب می‌دهد. این مقاله رویکرد ویژه منابع دوگانه را تأکید می‌کند و بیان می‌کند که اختیارات طبیعی رویکردی برای مرور کلی چنین تکنیکی بوده و رویه مناسبی را در مورد رویکرد وابسته به منبع دوگانه ایجاد می‌نماید.
Barclay, D., C. Higgins, and R. Thompson, The Partial Least Squares (pls) Approach to Casual Modeling: Personal Computer Adoption Ans Use as an Illustration. 1995.
Beach, R., et al., A review of manufacturing flexibility. European journal of operational research, 2000. 122(1): p. 41-57.
Beske, P., Dynamic capabilities and sustainable supply chain management. International Journal of Physical Distribution & Logistics Management, 2012. 42(4): p. 372-387.
Broman, G.I. and K.-H. Robèrt, A framework for strategic sustainable development. Journal of Cleaner Production, 2017. 140: p. 17-31.
Brown, J.E. and C. Hendry, Industrial districts and supply chains as vehicles for managerial and organizational learning. International Studies of Management & Organization, 1997. 27(4): p. 127-157.
Cohen, J., Statistical power analysis for the behavioral sciences. 2nd. 1988, Hillsdale, NJ: erlbaum. D'Souza, D.E. and F.P. Williams, Toward a taxonomy of manufacturing flexibility dimensions. Journal of operations management, 2000. 18(5): p. 577-593.
De Neufville, R., Applied systems analysis: engineering planning and technology management. Vol. 990. 1990: McGraw-Hill New York.
Dubey, R., et al., Sustainable supply chain management: framework and further research directions. Journal of Cleaner Production, 2017. 142: p. 1119-1130.
Duclos, L.K., R.J. Vokurka, and R.R. Lummus, A conceptual model of supply chain flexibility. Industrial Management & Data Systems, 2003. 103(6): p. 446-456.
Fayezi, S., A. Zutshi, and A. O’Loughlin, Developing an analytical framework to assess the uncertainty and flexibility mismatches across the supply chain. Business Process Management Journal, 2014. 20(3): p. 362-391.
Fiks, A.G., et al., Using freelisting to understand shared decision making in ADHD: parents’ and pediatricians’ perspectives. Patient education and counseling, 2011. 84(2): p. 236-244.
Fine, C.H., Clockspeed‐based strategies for supply chain design. Production and Operations Management, 2000. 9(3): p. 213-221.
Flynn*, B. and E. Flynn, Synergies between supply chain management and quality management: emerging implications. International Journal of Production Research, 2005. 43(16): p. 3421-3436.
Ford, D.N., D.M. Lander, and J.J. Voyer, A real options approach to valuing strategic flexibility in uncertain construction projects. Construction Management & Economics, 2002. 20(4): p. 343-351.
Gunasekaran, A., K.-h. Lai, and T.E. Cheng, Responsive supply chain: a competitive strategy in a networked economy. Omega, 2008. 36(4): p. 549-564.
Gupta, M.C., Environmental management and its impact on the operations function. International Journal of Operations & Production Management, 1995. 15(8): p. 34-51.
Heckman, J.J. Flexibility, Job Creation and Globalization: The Case of Italy. in Third Millennium Colloquia organised by the Instituto di Studi Economici et per l’Occupazione, Venice. 2002.
Herczeg, G., R. Akkerman, and M.Z. Hauschild, Supply chain collaboration in industrial symbiosis networks. Journal of Cleaner Production, 2018. 171: p. 1058-1067.
Hier, A., A COMPARISON OF ATTITUDES SHOWN BY BOYS AND GIRLS IN KEY STAGE 3 AND 4 TOWARDS PHYSICAL EDUCATION. 2013, Cardiff Metropolitan University.
Huan, S.H., S.K. Sheoran, and G. Wang, A review and analysis of supply chain operations reference (SCOR) model. Supply Chain Management: An International Journal, 2004. 9(1): p. 23-29.
Ivanov, D., A. Das, and T.-M. Choi, New flexibility drivers for manufacturing, supply chain and service operations. 2018, Taylor & Francis.
Jones, T.C. and D.W. Riley, Using inventory for competitive advantage through supply chain management. International Journal of Physical Distribution & Materials Management, 1985. 15(5): p. 16-26.
Kara, S. and B. Kayis, Manufacturing flexibility and variability: an overview. Journal of Manufacturing Technology Management, 2004. 15(6): p. 466-478.
Kesen, S.E., S.K. Das, and Z. Güngör, A genetic algorithm based heuristic for scheduling of virtual manufacturing cells (VMCs). Computers & Operations Research, 2010. 37(6): p. 1148-1156.
Koste, L.L. and M.K. Malhotra, A theoretical framework for analyzing the dimensions of manufacturing flexibility. Journal of operations management, 1999. 18(1): p. 75-93.
Kumar, V., et al., Implementation and management framework for supply chain flexibility. Journal of Enterprise Information Management, 2006. 19(3): p. 303-319.
Lusthaus, C., M.-H. Adrien, and G. Anderson, Enhancing organizational performance: a toolbox for self-assessment. 1999: IDRC.
Luthra, S., et al., An integrated framework for sustainable supplier selection and evaluation in supply chains. Journal of Cleaner Production, 2017. 140: p. 1686-1698.
M., E.L. and C.M. C., Supply Chain Management, Partnership, and the Shipper ‐ Third Party Relationship. The International Journal of Logistics Management, 1990. 1(2): p. 1-10.
Mandelbaum, M. and J. Buzacott, Flexibility and decision making. European Journal of Operational Research, 1990. 44(1): p. 17-27.
Martha, J. and S. Subbakrishna, Targeting a just-in-case supply chain for the inevitable next disaster. SUPPLY CHAIN MANAGEMENT REVIEW, V. 6, NO. 5 (SEPT./OCT. 2002), P. 18-23: ILL, 2002.
Matilde, V.-S., et al., Prevention of Herbicides Pollution Using Sorbents in Controlled Release Formulations, in Herbicides and Environment. 2011, InTech.
Narasimhan, R. and A. Das, An empirical investigation of the contribution of strategic sourcing to manufacturing flexibilities and performance. Decision Sciences, 1999. 30(3): p. 683-718.
Novel, A.-S., Is sharing more sustainable? the environmental promises of the sharing economy. Innovation for Sustainable Development, 2014: p. 139-144.
Nurdiani, I., J. Börstler, and S.A. Fricker, Literature review of flexibility attributes: A flexibility framework for software developing organization. Journal of Software: Evolution and Process, 2018: p. e1937.
Olhager, J. and B.M. West, The house of flexibility: using the QFD approach to deploy manufacturing flexibility. International Journal of Operations & Production Management, 2002. 22(1): p. 50-79.
Park, K., Flexible and redundant supply chain practices to build strategic supply chain resilience: contingent and resource-based perspectives. 2011.
Rice, J.B. and F. Caniato, Building a secure and resilient supply network. SUPPLY CHAIN MANAGEMENT REVIEW, V. 7, NO. 5 (SEPT./OCT. 2003), P. 22-30: ILL, 2003.
Barclay, D., C. Higgins, and R. Thompson, The Partial Least Squares (pls) Approach to Casual Modeling: Personal Computer Adoption Ans Use as an Illustration. 1995.
Beach, R., et al., A review of manufacturing flexibility. European journal of operational research, 2000. 122(1): p. 41-57.
Beske, P., Dynamic capabilities and sustainable supply chain management. International Journal of Physical Distribution & Logistics Management, 2012. 42(4): p. 372-387.
Broman, G.I. and K.-H. Robèrt, A framework for strategic sustainable development. Journal of Cleaner Production, 2017. 140: p. 17-31.
Brown, J.E. and C. Hendry, Industrial districts and supply chains as vehicles for managerial and organizational learning. International Studies of Management & Organization, 1997. 27(4): p. 127-157.
Cohen, J., Statistical power analysis for the behavioral sciences. 2nd. 1988, Hillsdale, NJ: erlbaum. D'Souza, D.E. and F.P. Williams, Toward a taxonomy of manufacturing flexibility dimensions. Journal of operations management, 2000. 18(5): p. 577-593.
De Neufville, R., Applied systems analysis: engineering planning and technology management. Vol. 990. 1990: McGraw-Hill New York.
Dubey, R., et al., Sustainable supply chain management: framework and further research directions. Journal of Cleaner Production, 2017. 142: p. 1119-1130.
Duclos, L.K., R.J. Vokurka, and R.R. Lummus, A conceptual model of supply chain flexibility. Industrial Management & Data Systems, 2003. 103(6): p. 446-456.
Fayezi, S., A. Zutshi, and A. O’Loughlin, Developing an analytical framework to assess the uncertainty and flexibility mismatches across the supply chain. Business Process Management Journal, 2014. 20(3): p. 362-391.
Fiks, A.G., et al., Using freelisting to understand shared decision making in ADHD: parents’ and pediatricians’ perspectives. Patient education and counseling, 2011. 84(2): p. 236-244.
Fine, C.H., Clockspeed‐based strategies for supply chain design. Production and Operations Management, 2000. 9(3): p. 213-221.
Flynn*, B. and E. Flynn, Synergies between supply chain management and quality management: emerging implications. International Journal of Production Research, 2005. 43(16): p. 3421-3436.
Ford, D.N., D.M. Lander, and J.J. Voyer, A real options approach to valuing strategic flexibility in uncertain construction projects. Construction Management & Economics, 2002. 20(4): p. 343-351.
Gunasekaran, A., K.-h. Lai, and T.E. Cheng, Responsive supply chain: a competitive strategy in a networked economy. Omega, 2008. 36(4): p. 549-564.
Gupta, M.C., Environmental management and its impact on the operations function. International Journal of Operations & Production Management, 1995. 15(8): p. 34-51.
Heckman, J.J. Flexibility, Job Creation and Globalization: The Case of Italy. in Third Millennium Colloquia organised by the Instituto di Studi Economici et per l’Occupazione, Venice. 2002.
Herczeg, G., R. Akkerman, and M.Z. Hauschild, Supply chain collaboration in industrial symbiosis networks. Journal of Cleaner Production, 2018. 171: p. 1058-1067.
Hier, A., A COMPARISON OF ATTITUDES SHOWN BY BOYS AND GIRLS IN KEY STAGE 3 AND 4 TOWARDS PHYSICAL EDUCATION. 2013, Cardiff Metropolitan University.
Huan, S.H., S.K. Sheoran, and G. Wang, A review and analysis of supply chain operations reference (SCOR) model. Supply Chain Management: An International Journal, 2004. 9(1): p. 23-29.
Ivanov, D., A. Das, and T.-M. Choi, New flexibility drivers for manufacturing, supply chain and service operations. 2018, Taylor & Francis.
Jones, T.C. and D.W. Riley, Using inventory for competitive advantage through supply chain management. International Journal of Physical Distribution & Materials Management, 1985. 15(5): p. 16-26.
Kara, S. and B. Kayis, Manufacturing flexibility and variability: an overview. Journal of Manufacturing Technology Management, 2004. 15(6): p. 466-478.
Kesen, S.E., S.K. Das, and Z. Güngör, A genetic algorithm based heuristic for scheduling of virtual manufacturing cells (VMCs). Computers & Operations Research, 2010. 37(6): p. 1148-1156.
Koste, L.L. and M.K. Malhotra, A theoretical framework for analyzing the dimensions of manufacturing flexibility. Journal of operations management, 1999. 18(1): p. 75-93.
Kumar, V., et al., Implementation and management framework for supply chain flexibility. Journal of Enterprise Information Management, 2006. 19(3): p. 303-319.
Lusthaus, C., M.-H. Adrien, and G. Anderson, Enhancing organizational performance: a toolbox for self-assessment. 1999: IDRC.
Luthra, S., et al., An integrated framework for sustainable supplier selection and evaluation in supply chains. Journal of Cleaner Production, 2017. 140: p. 1686-1698.
M., E.L. and C.M. C., Supply Chain Management, Partnership, and the Shipper ‐ Third Party Relationship. The International Journal of Logistics Management, 1990. 1(2): p. 1-10.
Mandelbaum, M. and J. Buzacott, Flexibility and decision making. European Journal of Operational Research, 1990. 44(1): p. 17-27.
Martha, J. and S. Subbakrishna, Targeting a just-in-case supply chain for the inevitable next disaster. SUPPLY CHAIN MANAGEMENT REVIEW, V. 6, NO. 5 (SEPT./OCT. 2002), P. 18-23: ILL, 2002.
Matilde, V.-S., et al., Prevention of Herbicides Pollution Using Sorbents in Controlled Release Formulations, in Herbicides and Environment. 2011, InTech.
Narasimhan, R. and A. Das, An empirical investigation of the contribution of strategic sourcing to manufacturing flexibilities and performance. Decision Sciences, 1999. 30(3): p. 683-718.
Novel, A.-S., Is sharing more sustainable? the environmental promises of the sharing economy. Innovation for Sustainable Development, 2014: p. 139-144.
Nurdiani, I., J. Börstler, and S.A. Fricker, Literature review of flexibility attributes: A flexibility framework for software developing organization. Journal of Software: Evolution and Process, 2018: p. e1937.
Olhager, J. and B.M. West, The house of flexibility: using the QFD approach to deploy manufacturing flexibility. International Journal of Operations & Production Management, 2002. 22(1): p. 50-79.
Park, K., Flexible and redundant supply chain practices to build strategic supply chain resilience: contingent and resource-based perspectives. 2011.
Rice, J.B. and F. Caniato, Building a secure and resilient supply network. SUPPLY CHAIN MANAGEMENT REVIEW, V. 7, NO. 5 (SEPT./OCT. 2003), P. 22-30: ILL, 2003.
Scheibe, K.P. and J. Blackhurst, Supply chain disruption propagation: a systemic risk and normal accident theory perspective. International Journal of Production Research, 2018. 56(1-2): p. 43-59.
Sethi, A.K. and S.P. Sethi, Flexibility in manufacturing: a survey. International journal of flexible manufacturing systems, 1990. 2(4): p. 289-328.
Sheffi, Y., Supply chain management under the threat of international terrorism. The International Journal of logistics management, 2001. 12(2): p. 1-11.
Sheffi, Y., et al. Supply chain response to global terrorism: A situation scan. in Center for Transportation and Logistics, MIT, Department of Management, Economics and Industrial Engineering, Politecnico di Milano, EurOMA POMS Joint International Conference. 2003.
Stadler, H. and C. Kilger, Supply Chain Management and Advanced Planning: Concepts. Models, Software and Case Studies, Berlin, 2002.
Stavrulaki, E. and M. Davis, Aligning products with supply chain processes and strategy. The International Journal of Logistics Management, 2010. 21(1): p. 127-151.
Suarez, F.F., M.A. Cusumano, and C.H. Fine, An empirical study of flexibility in manufacturing. Sloan management review, 1995. 37(1): p. 25.
Tang, C.-J.C., C.-Y. Lin, and T.K. Tang, Dynamic localization and functional implications of Aurora-C kinase during male mouse meiosis. Developmental biology, 2006. 290(2): p. 398-410.
Tomlin, B., On the value of mitigation and contingency strategies for managing supply chain disruption risks. Management Science, 2006. 52(5): p. 639-657.
Vickery, S.K., et al., The effects of an integrative supply chain strategy on customer service and financial performance: an analysis of direct versus indirect relationships. Journal of operations management, 2003. 21(5): p. 523-539.
Vonderembse, M.A., et al., Designing supply chains: Towards theory development. International Journal of production economics, 2006. 100(2): p. 223-238.
Wang, G., et al., Big data analytics in logistics and supply chain management: Certain investigations for research and applications. International Journal of Production Economics, 2016. 176: p. 98-110.
Wang, J.X., Lean manufacturing: Business bottom-line based. 2010: CRC Press.